TY-IMD-I-P Metal Detector
Application:
The detector is designed to detect metals in powdered and granular products in the chemical and food industries.
Features:
This detector offers high detection sensitivity. It uses dual-channel detection for improved product inspection and is made of hygienic, corrosion-resistant stainless steel. All systems are designed to minimise height for installation where space is limited.
Technical specifications:
| Model | TY-IMD-I-P | |||
| Specification | P75 | P100 | P150 | |
| Detection aperture diameter | 75mm | 100mm | 150mm | |
| Sensitivity | Fe |
Φ0.5mm ≥
|
Φ0.7mm ≥
|
Φ0.8mm ≥
|
| SUS |
Φ1.0mm ≥
|
Φ1.2mm ≥
|
Φ1.5mm ≥
|
|
| Product throughput |
3t/h
|
5t/h
|
10t/h
|
|
| Installation height |
700m
|
800mm
|
1000mm
|
|
|
Alarm model
|
Audible and visual alarm | |||
| Rejection |
When metal is detected, the gate automatically rejects it
|
|||
| Required pressure |
0.5Mpa ≥
|
|||
| Environment |
Temperature 10–40°C, humidity below 85% (protect against frost and condensation)
|
|||
| Power supply | 22V0 AC | |||
Note:
The sensitivities above apply to an empty machine; actual parameters depend on product operating conditions.
Hourly throughput depends on product bulk density; the table values assume a bulk density of 1000 kg/m3.
Equipment with different specifications can be ordered to customer requirements.